What isn't the dev agent's moves to nisse-core, unchanged in behaviour,
with its tests: canonical, render, render_anthropic, llm, catalog, probe,
context, views, state, reconcile, worker, cancel, dump, transport, matrix,
execution, testing, vault, memory, oplog, envfile and gitea (whole).
- nisse_core.state.StateStore holds the tables every agent has; an
agent's subclass adds its tables (version, migrations), roles and
views. nisse_dev.state.StateStore adds the build VM blocks (v5).
- views.project takes what each role is shown, rather than a fixed table.
- Vault takes the agent's name (agent=), for provenance.
- A test that nisse_core never imports an agent.
- The loop, config, git, delegation, expert, tools and evals stay in
nisse-dev until nisse-ops has a loop to share.
Docs: the Development Plan marks M7.1 done and notes that Phase 6 waits on
the agent host and Terraform; Architecture Part L names the package.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J5Utyfzw7gF7UhjRDEtjTk
nisse-dev now runs only the conversational loop. The gated state machine
it was built alongside is gone:
- Removed control.py, planner.py, executor.py, approvals.py, gates.py
(command_form moves to loop/reader.py), publish.py and poller.py, the
old assembly in agent.py (its shared helpers move to loop/build.py),
the store's state-machine view (get_state, transition), their tests,
the old end-to-end and live planning/milestone/gate tests, and
specs/orchestrator.qnt with its scenarios.
- Roles are driver, helper, expert and classifier; driver is required.
loop:, roles.planner, roles.executor and tuning.executor are refused
with what to use instead; tuning.driver takes the turn cap and failure
limit.
- The benchmark and the capability matrix measure the driver: the
loop's own system prompt and tools, the task's plan as the agreed
restatement. Task plans end with finish_milestone, so earlier runs
show as (old); stored runs' executor tuning reads as the driver's.
- A delegation on the loop records what its helper's alias resolved to
(L9), as the old path's did.
- The dump shows a work item's revision and what it waits for.
- Behaviour the old tests covered and the loop shares stays covered:
driver runs that fail on a model call, stop mid-turn, reset the
failure count; go-aheads ignoring case and punctuation; a request too
big to fit is never sent; the assembly tests, now on build_loop_agent.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
Every live test that touches a repository gets one of its own from
e2e_support.fresh_repo, made by the test operator as an operator makes a
project's (D4, D8): seeded from tests/integration/seed/ (the sandbox's
package, without past runs' leftovers), the agent's account a collaborator
with write access, main protected (pushes only by the owner, an approval to
merge), and a deploy key generated for the run. It is deleted afterwards
(NISSE_E2E_KEEP_REPOS keeps it); scripts/e2e-cleanup.sh deletes leftovers.
- Both e2e fixtures use it; per-run base branches are gone. The merge
helper approves first, as the protection now requires.
- test_gitea_live uses it, so CI needs NISSE_OPERATOR_TOKEN and no longer
writes the sandbox deploy key (NISSE_PUSH_KEY).
- A live test of the helper: seeded, shared with the agent, protected
against it, deleted.
- nisse-test.yaml's project entry is a placeholder; pytest and ruff skip
the seed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
The push credential is either a push-only account's token, handed to git
through a credential helper that names environment variables, never
values, or a deploy key in a short-lived ssh-agent. The remote URL
follows the credential. Configured as gitea.push_user and push_token, or
gitea.push_key.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
execution.SSHHost.execute is now the only way the agent runs anything
(L13). Commands travel as a script on SSH's stdin, so the secrets handed
to a call are never on a command line, and every value handed out is
redacted from the output. Timeouts kill the remote process group, and
an unreachable host is reported as such, not as a failed command.
Workspace and GitRepo run on the build VM. The clone uses the
repository's SSH URL, so no credential is stored in it (#89); fetches
and pushes get the push key over stdin, in a short-lived ssh-agent,
and PRs are still opened from the agent's host with its API token.
The bench runs on the build host too.
Tests reach "the build VM" through a throwaway local sshd (nisse_dev
.testing); CI installs openssh-server. The live push test now pushes
with the sandbox's deploy key (NISSE_PUSH_KEY).
Fixes#89.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
Development Plan M0.1. Every section reference in code, tests, specs/,
the example config, the tuning guide, and the CLAUDE.md and README files
now cites docs/Architecture.md (P, L, D, O, X, Q) instead of the old
spec's A-H, and docs/Architecture-Build-Spec.md is deleted (git keeps
it). The plan's old-to-new table goes with it.
Mostly mechanical, with a per-site choice where one old section split:
A4 became L2 where it meant stop/abandon/the loop and L3 where it meant
approvals; A10 became L6 in the context-budget code and L7 elsewhere; B2
became D4 for outbound Gitea and publishing and D5 for review intake;
'A3 step N' became the matching step of L8's boot sequence. Comments
describing behaviour the architecture drops (planning always escalating,
thresholds tuned at an old build step) now describe the current code and
point at the Development Plan.
docs/Architecture.md gains one line the rewrite missed: intake outages
delay but never fail work (old B2), now in L5, where the poller and
Matrix code cite it.
Comments and docs only; no behaviour change.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
With no production instance yet, there is no reason to carry two ways
of configuring the agent. Every environment variable that duplicated a
config key is gone; the environment now supplies only the secrets the
file references by ${…}, plus NISSE_CONFIG and NISSE_ENV to find the
files.
- AgentConfig loads from a file (load, from_file) or a parsed tree
(from_tree, for tests); a missing file is an error naming the example
- The from_env constructors on LiteLLMClient, AnthropicPassthroughClient,
GiteaClient, MatrixConfig and RoleMap are removed, with the env
reading for max output tokens; clients take their settings from config
- The live integration tests share a committed agent config,
tests/integration/nisse-test.yaml, aimed at test resources, and one
conftest that loads it and builds clients. NISSE_LIVE_PLANNER_MODEL
becomes its planner role; NISSE_CAPABILITY_MODELS stays as a per-run
switch
- A missing secret now fails the live tests instead of skipping them
- CI passes only the three tokens
- .env.example is secrets only; spec A5 says config comes from the file
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- approvals.py: PlanBoard opens one issue per project and posts each
plan revision as a comment carrying its rev tag. The state store
keeps only a pointer, so gate state can be re-derived from Gitea
after a state-volume loss — external truth wins
- Gitea comments are a second approval source: revision binding, the
typed word approve, and first-approval-wins work exactly as over
transport, with a per-channel allowlist because a Gitea login is
not a Matrix MXID
- Outcomes are echoed to the other channel, so the two records cannot
silently disagree about what was approved
- A Gitea outage degrades durability of the record, not the ability
to approve: planning proceeds and Matrix remains a complete channel
- Live test now asserts the server refuses the agent's own merge and
its push to the protected branch. That property was previously
true only because our code did not attempt it; branch protection
makes it structural, and this test fails if the protection is ever
relaxed
- Fixed a race in the process-group test: killing a group is
asynchronous and the grandchild is an orphan, so its exit is not
synchronised with our return; the test now waits for death
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The standalone half of the Gitea layer; orchestrator wiring follows
once the executor loop lands, to avoid colliding with it in
control.py.
- gitea.py: GiteaClient over httpx — open PRs, list and post issue
comments, close PRs. find_pull_request is the A3 external-truth
query that makes opening a PR idempotent across a crash, and it
checks closed PRs too, since a crash after opening must not be
answered with "nothing is open, so open another"
- pull_request_reconciler: an unreachable Gitea returns None rather
than a guess, so the agent gates to the human instead of risking a
duplicate side effect
- git.py: branch, commit, push for the workspace. The token is passed
per-invocation rather than stored as a remote, so it never lands in
.git/config, and anything raised is scrubbed of it
- commit_all returns None when there is nothing to commit: an empty
milestone is a fact to report, not an error
- Live test does the real round trip against the sandbox repo and
cleans up after itself
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
dongarandClaude Opus 5.5