nisse-dev now runs only the conversational loop. The gated state machine
it was built alongside is gone:
- Removed control.py, planner.py, executor.py, approvals.py, gates.py
(command_form moves to loop/reader.py), publish.py and poller.py, the
old assembly in agent.py (its shared helpers move to loop/build.py),
the store's state-machine view (get_state, transition), their tests,
the old end-to-end and live planning/milestone/gate tests, and
specs/orchestrator.qnt with its scenarios.
- Roles are driver, helper, expert and classifier; driver is required.
loop:, roles.planner, roles.executor and tuning.executor are refused
with what to use instead; tuning.driver takes the turn cap and failure
limit.
- The benchmark and the capability matrix measure the driver: the
loop's own system prompt and tools, the task's plan as the agreed
restatement. Task plans end with finish_milestone, so earlier runs
show as (old); stored runs' executor tuning reads as the driver's.
- A delegation on the loop records what its helper's alias resolved to
(L9), as the old path's did.
- The dump shows a work item's revision and what it waits for.
- Behaviour the old tests covered and the loop shares stays covered:
driver runs that fail on a model call, stop mid-turn, reset the
failure count; go-aheads ignoring case and punctuation; a request too
big to fit is never sent; the assembly tests, now on build_loop_agent.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
- propose_project(name, purpose, decisions) in a conversation goes up for
a go-ahead (checked: a slug, not an existing project, no trailing
question).
- On go, the provisioning checklist (D1): a repository with a README,
protection on its default branch, the agent as a collaborator, a build
VM, a deploy key, and the project entry as YAML with <...> to fill in.
- On "done", the agent reads its configuration again and adds the new
project live (build_loop_agent(load=...); only additions), then checks
what was provided (D4, verified, not assumed): permissions and
protection as it sees them, then on a throwaway branch with an empty
commit, a branch push must succeed and a push to the default branch and
merging its own PR must be refused. The check's PR is closed and its
branch deleted. Failures are said per item; nothing starts.
- Checked: the tracking issue (the distilled decisions, carrying the new
item's ID), and the project's item, agreed and labelled `design`, whose
first milestone is ARCHITECTURE.md and the build plan. A conversation
waiting on provisioning doesn't close as idle.
- The walk replays exactly from its seed (item IDs too), and event IDs
stay unique across simulated restarts, as a server's are.
- The test config holds output to 8192 tokens, under the test key's
per-request cost cap.
Tests: new-project unit tests (checklist and its YAML parse as config, done
before the entry, what isn't set up, a checked project's record and first
PR, an existing name), protection enforced by a hook on the fake forge,
the walk proposing projects and saying done, and an e2e new project in a
repository the test operator provisions from the agent's checklist.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
Every live test that touches a repository gets one of its own from
e2e_support.fresh_repo, made by the test operator as an operator makes a
project's (D4, D8): seeded from tests/integration/seed/ (the sandbox's
package, without past runs' leftovers), the agent's account a collaborator
with write access, main protected (pushes only by the owner, an approval to
merge), and a deploy key generated for the run. It is deleted afterwards
(NISSE_E2E_KEEP_REPOS keeps it); scripts/e2e-cleanup.sh deletes leftovers.
- Both e2e fixtures use it; per-run base branches are gone. The merge
helper approves first, as the protection now requires.
- test_gitea_live uses it, so CI needs NISSE_OPERATOR_TOKEN and no longer
writes the sandbox deploy key (NISSE_PUSH_KEY).
- A live test of the helper: seeded, shared with the agent, protected
against it, deleted.
- nisse-test.yaml's project entry is a placeholder; pytest and ruff skip
the seed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
- Config: `projects: {name: entry}` with repo, base_branch, workspace,
build_host, push credential, labels (defaults added to every issue),
secrets by ${VAR} reference with visibility (commands | harness), and
egress (recorded, not enforced). Every problem in every entry is
reported at once; an inline secret, a bad visibility, a repeated repo or
a non-slug name is an error.
- The old loop runs exactly one project (only_project) and refuses more.
- The new loop is per project: each its own clone, workspace (with its
commands-visible secrets, redacted on return), push credential and
milestones; intake polls every project's repository; items are scoped
to their project for every run, publish and PR watch. Issues are named
project#14 when there is more than one project, and a bare #14 that
matches two is asked about. Switching projects parks the one worked on
last (all others after a boot).
- A restatement that ends in a question is sent back to the driver, not
posted: the e2e driver kept asking "Is this the right interpretation?",
which a plain yes can't answer.
Tests: config entries and errors, two-project assembly, two-project loop
tests (intake, own workspaces and repos, #14 in both, do-next, label
defaults, parking across projects), the property walk over two projects
with a new own_repository_only property (an item using the first
project's repo fails 15 of 16 seeds), and the restatement check.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
The push credential is either a push-only account's token, handed to git
through a credential helper that names environment variables, never
values, or a deploy key in a short-lived ssh-agent. The remote URL
follows the credential. Configured as gitea.push_user and push_token, or
gitea.push_key.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
execution.SSHHost.execute is now the only way the agent runs anything
(L13). Commands travel as a script on SSH's stdin, so the secrets handed
to a call are never on a command line, and every value handed out is
redacted from the output. Timeouts kill the remote process group, and
an unreachable host is reported as such, not as a failed command.
Workspace and GitRepo run on the build VM. The clone uses the
repository's SSH URL, so no credential is stored in it (#89); fetches
and pushes get the push key over stdin, in a short-lived ssh-agent,
and PRs are still opened from the agent's host with its API token.
The bench runs on the build host too.
Tests reach "the build VM" through a throwaway local sshd (nisse_dev
.testing); CI installs openssh-server. The live push test now pushes
with the sandbox's deploy key (NISSE_PUSH_KEY).
Fixes#89.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
Architecture L9's role names, for the two roles with a direct
counterpart: the delegation role is now 'helper' and the ask_expert role
'expert', in RoleMap, configuration (roles.helper, roles.expert),
recorded events and tests. 'planner' and 'executor' stay distinct for
now; they become 'driver' when the new loop merges them (Development
Plan M2.3).
Configurations must rename their keys: nisse-dev.example.yaml and
tests/integration/nisse-test.yaml are updated here.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
With no production instance yet, there is no reason to carry two ways
of configuring the agent. Every environment variable that duplicated a
config key is gone; the environment now supplies only the secrets the
file references by ${…}, plus NISSE_CONFIG and NISSE_ENV to find the
files.
- AgentConfig loads from a file (load, from_file) or a parsed tree
(from_tree, for tests); a missing file is an error naming the example
- The from_env constructors on LiteLLMClient, AnthropicPassthroughClient,
GiteaClient, MatrixConfig and RoleMap are removed, with the env
reading for max output tokens; clients take their settings from config
- The live integration tests share a committed agent config,
tests/integration/nisse-test.yaml, aimed at test resources, and one
conftest that loads it and builds clients. NISSE_LIVE_PLANNER_MODEL
becomes its planner role; NISSE_CAPABILITY_MODELS stays as a per-run
switch
- A missing secret now fails the live tests instead of skipping them
- CI passes only the three tokens
- .env.example is secrets only; spec A5 says config comes from the file
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
dongarandClaude Opus 5.5