Shared parts, not a shared scheduler (agreed): nisse-review will have its
own small scheduler; a common one waits until two exist to compare.
- nisse_core.loop.driver: the driver run, moved; the agent names its
waiting tools per run (nisse-dev's are WAITING_TOOLS), and execution
goes to any Executor (ToolOutcome moves with it).
- nisse_core.loop.tools: the tool helper and the tools any agent offers
(notes, memory, memory_done, ask_expert); nisse_core.loop.expert.
- nisse_core.knowledge.handlers: Knowledge, the vault and memory as
control tools, the index and prompt text, out of LoopAgent.
- nisse_core.config: file reading, references, people, tuning sections of
the agent's own, LLM numbers, the vault.
- New core tests: a driver run with a non-workspace executor and the
agent's own waiting set; Knowledge alone; the shared config pieces.
Docs: the Development Plan marks M7.2 done; Architecture Part L and the
nisse-core README name the new parts.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J5Utyfzw7gF7UhjRDEtjTk
What isn't the dev agent's moves to nisse-core, unchanged in behaviour,
with its tests: canonical, render, render_anthropic, llm, catalog, probe,
context, views, state, reconcile, worker, cancel, dump, transport, matrix,
execution, testing, vault, memory, oplog, envfile and gitea (whole).
- nisse_core.state.StateStore holds the tables every agent has; an
agent's subclass adds its tables (version, migrations), roles and
views. nisse_dev.state.StateStore adds the build VM blocks (v5).
- views.project takes what each role is shown, rather than a fixed table.
- Vault takes the agent's name (agent=), for provenance.
- A test that nisse_core never imports an agent.
- The loop, config, git, delegation, expert, tools and evals stay in
nisse-dev until nisse-ops has a loop to share.
Docs: the Development Plan marks M7.1 done and notes that Phase 6 waits on
the agent host and Terraform; Architecture Part L names the package.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J5Utyfzw7gF7UhjRDEtjTk
M4.3's block, with new triggers and a way out. A VM out of reach at the
check before a run, in a run (which ends there: the driver, a toolchain
step and a requested step), or while preparing the workspace blocks every
project on it; the item stays ready, waiting on no one. On the intake round
it is tried again every tuning.build_vm.retry_s (300), and once it answers
it must still answer settle_s (180) later; then the work a lost run left
there is parked (pushed), the VM unblocked, and that said once.
A changed host key, at the check or on a retry, blocks the VM too, until
the operator's `vm ready`, which trusts the new key: `trust new host key`
is retired, and the message says it's a key problem that may be an
impersonation. Questions are answered while a VM is blocked, without it.
Starting the agent with a VM down no longer fails.
The walk breaks the VM's SSH, now or partway through a run, and checks that
no model works on a VM that is down; loop.qnt models the VM going and
coming back (unblocked_only_when_up). Together they found: a lost run's
work set aside by the next item there; a question left behind a block; a
lost VM swallowed while the toolchain step checked or recorded it; and a
remark waiting to be answered that outlived its PR's merge. All fixed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J5Utyfzw7gF7UhjRDEtjTk
nisse-dev now runs only the conversational loop. The gated state machine
it was built alongside is gone:
- Removed control.py, planner.py, executor.py, approvals.py, gates.py
(command_form moves to loop/reader.py), publish.py and poller.py, the
old assembly in agent.py (its shared helpers move to loop/build.py),
the store's state-machine view (get_state, transition), their tests,
the old end-to-end and live planning/milestone/gate tests, and
specs/orchestrator.qnt with its scenarios.
- Roles are driver, helper, expert and classifier; driver is required.
loop:, roles.planner, roles.executor and tuning.executor are refused
with what to use instead; tuning.driver takes the turn cap and failure
limit.
- The benchmark and the capability matrix measure the driver: the
loop's own system prompt and tools, the task's plan as the agreed
restatement. Task plans end with finish_milestone, so earlier runs
show as (old); stored runs' executor tuning reads as the driver's.
- A delegation on the loop records what its helper's alias resolved to
(L9), as the old path's did.
- The dump shows a work item's revision and what it waits for.
- Behaviour the old tests covered and the loop shares stays covered:
driver runs that fail on a model call, stop mid-turn, reset the
failure count; go-aheads ignoring case and punctuation; a request too
big to fit is never sent; the assembly tests, now on build_loop_agent.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
- A near miss for abandon ("abort", "cancel", "drop it", ...) in an item's
thread is asked about, and changes nothing.
- The driver is told only the operator stops or closes an item, so it
doesn't claim to have done either.
- An issue assigned again after its item closed starts a new item that
notes the one before (Gitea's timeline gives the assignment time);
item_for_issue returns the latest item.
- Abandoning an issue Gitea won't close because of open dependencies says
so, naming them.
- An agreed item isn't offered restate.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
- Questions never change state (L5, #77): a message ending in "?" to a
waiting project item starts a question run (reply and look-only tools,
an instruction to change nothing), and the item goes back to the very
wait it was in: a restatement up stays up and a go binds to it; the
agent's own question stays open.
- Explanations: a restatement gives its reasons and the main alternative;
a revision says what changed (restate(changed), sent back without it);
a milestone's summary says what was done, verified and left open.
- Progress in prose (#42): the driver's and a helper's own words for a
turn are posted, trimmed, at most once a minute per item; `details`
shows the last tool calls; a message arriving mid-run is acknowledged at
once ("Noted; ...").
- CI: the e2e job's comments and the plan no longer claim a newer push
cancels the run it supersedes (Gitea here doesn't); the concurrency
block goes.
Tests: conversation unit tests (questions in a go-ahead and an answer wait,
an unanswerable question, revisions, progress rate and trimming, details,
mid-run notes), the helper's progress, the walk asking questions in every
state with a questions_change_nothing property (routing questions the old
way fails 32 of 48 seeds), and an e2e question while a restatement is up.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
- A top-level message that isn't a command is a conversation: an item in
the `general` scope (L1), threaded under the operator's message, with
`reply`, `ask_human` and `propose_work` and no workspace or execution.
`general` is reserved as a project name.
- propose_work(project, title, summary) goes up as a revision for a
go-ahead (or a plain yes). On go, under a file_issue intent (L8), the
record issue is opened in that project, assigned to the agent and
carrying the new item's ID; its item starts agreed, with the summary as
its brief. Intake skips any issue carrying an ID (D1); boot adopts a
filed issue or puts the proposal up again.
- A conversation closes after tuning.loop.general_idle_s (default a day);
a reply in its thread then starts a new conversation that continues it.
Tests: conversation unit tests (threading, filing, the marker, an unknown
project, changes, idle close and continuation, a plain yes, both crash
cases, commands at top level); the walk with conversations, proposals and
idle time, and records_have_one_item / conversations_do_no_work; an e2e
conversation that becomes filed work.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
- Commands that name their item ("go #14", "abandon #14", "stop #14")
apply to it wherever they're said; go, approve and abandon alone at top
level are asked about (L5). stop is never taken as an answer.
- A plain-language reply to a restatement is read by GoAheadReader, one
model call that agrees only on a clear yes; questions never reach it. The
agent says "taking that as a go-ahead on rev-N" first, bound to the
revision on screen at arrival (L3, L5, D1).
- Labels steer (D1): `bug` goes ahead after tuning.loop.bug_grace_s
(default 600 s) unless the operator replies; `discuss` isn't offered
restate until the operator has spoken; `bug`, `discuss` and `design` add
to the driver's instructions. A restatement asks no questions.
Tests: label and command unit tests, the property walk with labelled
issues, plain yeses, named gos and time passing (grace_only_unanswered,
discuss_talks_first), and e2e tests for a bug proceeding after its grace
period and a plain-language go-ahead.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
Several work items on the new loop (L1, D4):
- Switching parks the item on the workspace: its work is committed and its
branch pushed; resuming checks the item's branch back out. Branches of
open items are never set aside by a fresh workspace.
- Next item: the operator's "do #N next" first, otherwise the oldest.
- Issues with open Gitea dependencies are blocked until they close, checked
at intake and on every round; status shows blocked items and the line.
Tests: queue unit tests, the property walk over several issues with
dependencies and a new parked_work_safe property (it catches parking
disabled), and an end-to-end test with two issues where B depends on A.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
The first live run of the new loop's e2e test found that a fact recorded
while start_milestone was in flight landed between the tool call and its
result; both API formats reject that, so every later request in the run
failed. Views now keep each result right after its call. Scripted test
models check the APIs' ordering rules, so this can't pass unit tests
again.
The e2e tests no longer depend on the sandbox's history: each run asks for
a uniquely named function and works against a base branch of its own,
deleted afterwards. The review step asks for a change that can't already
be there. The scripted operator gives up after five fruitless answers, and
each run keeps its state store for inspection. The driver's prompt says
review fixes stay in the current milestone.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
nisse_dev.loop runs alongside control.py, chosen with `loop: new`.
Issues assigned to the agent (by an operator, or filed by one) become work
items, each with a Matrix thread. A driver run is one model with tools
until it calls a waiting tool: restate puts rev-N up for a go-ahead, bound
to the revision on screen when the reply arrived; ask_human waits for an
answer; close_item closes the item and its issue. Before the go-ahead the
driver can look but not change or close anything. One item is active at a
time; replies in an item's thread go to it. On boot, an item cut off
mid-run waits on the operator, and waiting points are put up again.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PPQ14L3LikyefCMFBqEbKE
dongarandClaude Opus 5.5